/dts-v1/;

#include "mt6753.dtsi"
#include <dt-bindings/lcm/r63417_fhd_dsi_cmd_truly_nt50358.dtsi>
#include "mlt8783_ftb_m_bat_setting.dtsi"

/ {
memory@00000000 {
		device_type = "memory";
		reg = <0 0x40000000 0 0x3F000000>;
	};

	bus {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0 0 0xffffffff>;

		MTKFB@5e200000 {
			compatible = "mediatek,MTKFB";
			reg = <0x7F000000 0x1000000>;
		};

	};
	led0:led@0 {
		compatible = "mediatek,red";
		led_mode = <0>;
		data = <1>;
		pwm_config = <0 0 0 0 0>;
	};
	led1:led@1 {
		compatible = "mediatek,green";
		led_mode = <0>;
		data = <1>;
		pwm_config = <0 0 0 0 0>;
	};
	led2:led@2 {
		compatible = "mediatek,blue";
		led_mode = <0>;
		data = <1>;
		pwm_config = <0 0 0 0 0>;
	};
	led3:led@3 {
		compatible = "mediatek,jogball-backlight";
		led_mode = <0>;
		data = <1>;
		pwm_config = <0 0 0 0 0>;
	};
	led4:led@4 {
		compatible = "mediatek,keyboard-backlight";
		led_mode = <0>;
		data = <1>;
		pwm_config = <0 0 0 0 0>;
	};
	led5:led@5 {
		compatible = "mediatek,button-backlight";
		led_mode = <0>;
		data = <1>;
		pwm_config = <0 0 0 0 0>;
	};
	led6:led@6 {
		compatible = "mediatek,lcd-backlight";
		led_mode = <5>;
		data = <1>;
		pwm_config = <0 0 0 0 0>;
	};
	vibrator0:vibrator@0 {
		compatible = "mediatek,vibrator";
		vib_timer = <25>;
		vib_limit = <9>;
		vib_vol= <5>;
	};
 /* sensor standardization */
	cust_accel@0 {
		compatible = "mediatek,mpu6050g";
		i2c_num = <2>;
		i2c_addr = <0x68 0 0 0>;
		direction = <4>;
		power_id = <0xffff>;
		power_vol = <0>;
		firlen = <0>;
		is_batch_supported = <0>;
	};

		cust_alsps@0 {
		compatible = "mediatek,apds9930";
		i2c_num	= <2>;
		i2c_addr = <0x72 0x48 0x78 0x00>;
		polling_mode_ps = <0>;
		polling_mode_als = <1>;
		power_id = <0xffff>;
		power_vol = <0>;
		als_level = <1 2 5 10 20 30 40 80 200 300 400 600 1000 1600 2000>;
		als_value = <80 400 800 1200 1800 2000 2300 2300 12000 12000 12000 48000 48000 72000 81920 81920>;
		ps_threshold_high =  <90>;
		ps_threshold_low =  <70>;
		is_batch_supported_ps   = <0>;
		is_batch_supported_als  = <0>;
	};

		cust_mag@0 {
		compatible				= "mediatek,akm09911";
		i2c_num					= <2>;
		i2c_addr				= <0x0D 0 0 0>;
		direction				= <1>;
		power_id				= <0xffff>;
		power_vol				= <0>;
		is_batch_supported			= <0>;
		};

		cust_gyro@0 {
		compatible				= "mediatek,mpu6050gy";
		i2c_num					= <2>;
		i2c_addr				= <0x69 0 0 0>;
		direction				= <4>;
		power_id				= <0xffff>;
		power_vol				= <0>;
		firlen					= <0>;
		is_batch_supported			= <0>;
		};

/* Connectivity */
	mediatek,connectivity-combo {
		compatible = "mediatek,connectivity-combo";
		/*gpio_combo_ldo_en_pin = <&pio 0xffff 0>;	/*0) GPIO_COMBO_LDO_EN_PIN */
		/*gpio_combo_pmuv28_en_pin = <&pio 0xffff 0>;	/* 1) GPIO_COMBO_PMUV28_EN_PIN */
		gpio_combo_pmu_en_pin = <&pio 21 0>;		/* 2) GPIO_COMBO_PMU_EN_PIN */
		gpio_combo_rst_pin = <&pio 186 0>;		/* 3) GPIO_COMBO_RST_PIN pin */
		/*gpio_combo_bgf_eint_pin = <&pio 0xffff 0>;	/* 4) GPIO_COMBO_BGF_EINT_PIN */
		gpio_wifi_eint_pin = <&pio 20 0>;		/* 5) GPIO_WIFI_EINT_PIN */
		/*gpio_all_eint_pin = <&pio 0xffff 0>;		/* 6) GPIO_ALL_EINT_PIN */
		gpio_combo_urxd_pin = <&pio 74 0>;		/* 7) GPIO_COMBO_URXD_PIN */
		gpio_combo_utxd_pin = <&pio 75 0>;		/* 8) GPIO_COMBO_UTXD_PIN */
		gpio_pcm_daiclk_pin = <&pio 184 0>;		/* 9) GPIO_PCM_DAICLK_PIN */
		gpio_pcm_daipcmin_pin = <&pio 185 0>;		/* 10) GPIO_PCM_DAIPCMIN_PIN */
		gpio_pcm_daipcmout_pin = <&pio 187 0>;		/* 11) GPIO_PCM_DAIPCMOUT_PIN */
		gpio_pcm_daisync_pin = <&pio 188 0>;		/* 12) GPIO_PCM_DAISYNC_PIN */
		/*gpio_combo_i2s_ck_pin = <&pio 0xffff 0>;	/* 13) GPIO_COMBO_I2S_CK_PIN */
		/*gpio_combo_i2s_ws_pin = <&pio 0xffff 0>;	/* 14) GPIO_COMBO_I2S_WS_PIN */
		/*gpio_combo_i2s_dat_pin = <&pio 0xffff 0>;	/* 15) GPIO_COMBO_I2S_DAT_PIN */
		gpio_gps_sync_pin = <&pio 19 0>;	/* 16) GPIO_GPS_SYNC_PIN */
		gpio_gps_lna_pin = <&pio 77 0>;		/* 17) GPIO_GPS_LNA_PIN */
		pinctrl-names = "gpio_pmu_en_pull_dis",
			"gpio_pmu_en_in_pulldown",
			"gpio_rst_pull_dis",
			"gpio_wifi_eint_in_pull_dis",
			"gpio_wifi_eint_in_pullup",
			"gpio_urxd_uart_pull_dis",
			"gpio_urxd_gpio_in_pullup",
			"gpio_urxd_gpio_in_pull_dis",
			"gpio_utxd_uart_pull_dis",
			"gpio_pcm_daiclk_pull_dis",
			"gpio_pcm_daipcmin_pull_dis",
			"gpio_pcm_daipcmout_pull_dis",
			"gpio_pcm_daisync_pull_dis",
			"gpio_gps_sync_pull_dis",
			"gpio_gps_lna_pull_dis";
		pinctrl-0 = <&pcfg_combo_pmu_en_pull_dis_cfgs>;
		pinctrl-1 = <&pcfg_combo_pmu_en_in_pulldown_cfgs>;
		pinctrl-2 = <&pcfg_combo_rst_pull_dis_cfgs>;
		pinctrl-3 = <&pcfg_combo_wifi_eint_in_pull_dis_cfgs>;
		pinctrl-4 = <&pcfg_combo_wifi_eint_in_pullup_cfgs>;
		pinctrl-5 = <&pcfg_combo_urxd_uart_pull_dis_cfgs>;
		pinctrl-6 = <&pcfg_combo_urxd_gpio_in_pullup_cfgs>;
		pinctrl-7 = <&pcfg_combo_urxd_gpio_in_pull_dis_cfgs>;
		pinctrl-8 = <&pcfg_combo_utxd_uart_pull_dis_cfgs>;
		pinctrl-9 = <&pcfg_combo_pcm_daiclk_pull_dis_cfgs>;
		pinctrl-10 = <&pcfg_combo_pcm_daipcmin_pull_dis_cfgs>;
		pinctrl-11 = <&pcfg_combo_pcm_daipcmout_pull_dis_cfgs>;
		pinctrl-12 = <&pcfg_combo_pcm_daisync_pull_dis_cfgs>;
		pinctrl-13 = <&pcfg_combo_gps_sync_pull_dis_cfgs>;
		pinctrl-14 = <&pcfg_combo_gps_lna_pull_dis_cfgs>;
		interrupt-parent = <&eintc>;
		interrupts = < 20 IRQ_TYPE_LEVEL_LOW >;	/* WIFI EINT num is 1 active low level-sensitive */
		debounce = <20 0>;
		status = "okay";
	};
};

/* sensor gpio standization */

&pio {
	alsps_intpin_cfg: alspspincfg {

	    pins_cmd_dat {
			pins = <PINMUX_GPIO65__FUNC_GPIO65>;
			slew-rate = <0>;
			bias-pull-up = <00>;
		};
	};

	alsps_intpin_default: alspsdefaultcfg {

	};

	gyro_intpin_cfg: gyropincfg {

	    pins_cmd_dat {
			pins = <PINMUX_GPIO67__FUNC_GPIO67>;
			slew-rate = <0>;
			bias-pull-down = <00>;
		};
	};

	gyro_intpin_default: gyrodefaultcfg {

	};
};
&alsps {
	pinctrl-names = "pin_default", "pin_cfg";
	pinctrl-0 = <&alsps_intpin_default>;
	pinctrl-1 = <&alsps_intpin_cfg>;
	status = "okay";

};

&gyro {
	pinctrl-names = "pin_default", "pin_cfg";
	pinctrl-0 = <&gyro_intpin_default>;
	pinctrl-1 = <&gyro_intpin_cfg>;
	status = "okay";

};
/* sensor end */

&accdet {
	interrupt-parent = <&eintc>;
	interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
	eint-debounce = <256>;
	accdet-gpio = <&pio 86 0>;
	accdet-mic-vol = <7>;
	headset-mode-setting = <0x500 0x200 1 0x1f0 0x800 0x800 0x20>;
	accdet-plugout-debounce = <20>;
	/*1:ACC mode, 2:low cost without in bias, 6:low cost with in bias*/
	accdet-mic-mode = <1>;
	/*0--MD_MAX--UP_MAX--DW_MAX*/
	headset-three-key-threshold = <0 80 220 500>;
	/*0--MD_MAX--VOICE_MAX--UP_MAX--DW_MAX*/
	headset-four-key-threshold = <0 58 121 192 450>;
	pinctrl-names = "default", "state_eint_as_int";
	pinctrl-0 = <&accdet_pins_default>;
	pinctrl-1 = <&accdet_pins_eint_as_int>;
	status = "okay";
};
&touch {
	tpd-resolution = <1080 1920>;
	use-tpd-button = <0>;
	tpd-key-num = <3>;
	tpd-key-local= <139 172 158 0>;
	tpd-key-dim-local = <90 883 100 40 230 883 100 40 370 883 100 40 0 0 0 0>;
	tpd-max-touch-num = <5>;
	tpd-filter-enable = <1>;
	tpd-filter-pixel-density = <186>;
	tpd-filter-custom-prameters = <0 0 0 0 0 0 0 0 0 0 0 0>;
	tpd-filter-custom-speed = <0 0 0>;
	pinctrl-names = "default", "state_eint_as_int", "state_eint_output0", "state_eint_output1",
		"state_rst_output0", "state_rst_output1";
	pinctrl-0 = <&CTP_pins_default>;
	pinctrl-1 = <&CTP_pins_eint_as_int>;
	pinctrl-2 = <&CTP_pins_eint_output0>;
	pinctrl-3 = <&CTP_pins_eint_output1>;
	pinctrl-4 = <&CTP_pins_rst_output0>;
	pinctrl-5 = <&CTP_pins_rst_output1>;
	status = "okay";
};
&pio {
	CTP_pins_default: eint0default {
	};
	accdet_pins_default: eint86default {
	};

	accdet_pins_eint_as_int: eint86 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO86__FUNC_GPIO86>;
			bias-disable;
		};
	};
	CTP_pins_eint_as_int: eint@0 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO10__FUNC_GPIO10>;
			slew-rate = <0>;
			bias-disable;
		};
	};
	CTP_pins_eint_output0: eintoutput0 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO10__FUNC_GPIO10>;
			slew-rate = <1>;
			output-low;
		};
	};
	CTP_pins_eint_output1: eintoutput1 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO10__FUNC_GPIO10>;
			slew-rate = <1>;
			output-high;
		};
	};
	CTP_pins_rst_output0: rstoutput0 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO62__FUNC_GPIO62>;
			slew-rate = <1>;
			output-low;
		};
	};
	CTP_pins_rst_output1: rstoutput1 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO62__FUNC_GPIO62>;
			slew-rate = <1>;
			output-high;
		};
	};
};
/* TOUCH end */
/* CAMERA GPIO standardization */
&pio {
	camera_pins_cam0_rst0: cam0@0 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO44__FUNC_GPIO44>;/*GPIO_CAMERA_CMRST_PIN*/
			slew-rate = <1>; /*direction 0:in, 1:out*/
			output-low;/*direction out used only. output_low or high*/
		};
	};
	camera_pins_cam0_rst1: cam0@1 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO44__FUNC_GPIO44>;/*GPIO_CAMERA_CMRST_PIN*/
			slew-rate = <1>;
			output-high;
		};
	};
	camera_pins_cam0_pnd0: cam0@2 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO82__FUNC_GPIO82>;/*GPIO_CAMERA_CMPDN_PIN*/
			slew-rate = <1>;
			output-low;
		};
	};
	camera_pins_cam0_pnd1: cam0@3 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO82__FUNC_GPIO82>;/*GPIO_CAMERA_CMPDN_PIN*/
			slew-rate = <1>;
			output-high;
		};
	};
	camera_pins_cam1_rst0: cam1@0 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO44__FUNC_GPIO44>;/*GPIO_CAMERA_CMRST1_PIN*/
			slew-rate = <1>; /*direction 0:in, 1:out*/
			output-low;/*direction out used only. output_low or high*/
		};
	};
	camera_pins_cam1_rst1: cam1@1 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO44__FUNC_GPIO44>;/*GPIO_CAMERA_CMRST1_PIN*/
			slew-rate = <1>;
			output-high;
		};
	};
	camera_pins_cam1_pnd0: cam1@2 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO12__FUNC_GPIO12>;/*GPIO_CAMERA_CMPDN1_PIN*/
			slew-rate = <1>;
			output-low;
		};
	};
	camera_pins_cam1_pnd1: cam1@3 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO12__FUNC_GPIO12>;/*GPIO_CAMERA_CMPDN1_PIN*/
			slew-rate = <1>;
			output-high;
		};
	};
	camera_pins_cam_ldo0_0: cam@0 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO11__FUNC_GPIO11>;
			slew-rate = <1>;
			output-low;
		};
	};
	camera_pins_cam_ldo0_1: cam@1 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO11__FUNC_GPIO11>;
			slew-rate = <1>;
			output-high;
		};
	};
	camera_pins_default: camdefault {

	};
};

&kd_camera_hw1 {
	pinctrl-names = "default", "cam0_rst0", "cam0_rst1", "cam0_pnd0", "cam0_pnd1",
	"cam1_rst0", "cam1_rst1", "cam1_pnd0", "cam1_pnd1",
	"cam_ldo0_0", "cam_ldo0_1";
	pinctrl-0 = <&camera_pins_default>;
	pinctrl-1 = <&camera_pins_cam0_rst0>;
	pinctrl-2 = <&camera_pins_cam0_rst1>;
	pinctrl-3 = <&camera_pins_cam0_pnd0>;
	pinctrl-4 = <&camera_pins_cam0_pnd1>;
	pinctrl-5 = <&camera_pins_cam1_rst0>;
	pinctrl-6 = <&camera_pins_cam1_rst1>;
	pinctrl-7 = <&camera_pins_cam1_pnd0>;
	pinctrl-8 = <&camera_pins_cam1_pnd1>;
	pinctrl-9 = <&camera_pins_cam_ldo0_0>;
	pinctrl-10 = <&camera_pins_cam_ldo0_1>;
	status = "okay";

};
/* CAMERA GPIO end */

/* CONSYS GPIO standardization */
&pio {
	consys_pins_default: default {

	};

	gpslna_pins_init: gpslna@0 {

	    pins_cmd_dat {
			pins = <PINMUX_GPIO79__FUNC_GPIO79>;
			slew-rate = <0>;
			bias-disable;
			output-low;
		};
	};

	gpslna_pins_oh: gpslna@1 {

	    pins_cmd_dat {
			pins = <PINMUX_GPIO79__FUNC_GPIO79>;
			slew-rate = <1>;
			output-high;
		};
	};

	gpslna_pins_ol: gpslna@2 {

	    pins_cmd_dat {
			pins = <PINMUX_GPIO79__FUNC_GPIO79>;
			slew-rate = <1>;
			output-low;
		};
	};

};

&consys {
	pinctrl-names = "default", "gps_lna_state_init", "gps_lna_state_oh", "gps_lna_state_ol";
	pinctrl-0 = <&consys_pins_default>;
	pinctrl-1 = <&gpslna_pins_init>;
	pinctrl-2 = <&gpslna_pins_oh>;
	pinctrl-3 = <&gpslna_pins_ol>;
	status = "okay";

};
/* CONSYS end */
/* mmc start */
&mmc0 {
		clk_src = /bits/ 8 <MSDC50_CLKSRC_400MHZ>;
		bus-width = <8>;
		max-frequency = <200000000>;
		cap-mmc-highspeed;
		msdc-sys-suspend;
		mmc-ddr-1_8v;
		mmc-hs200-1_8v;
		mmc-hs400-1_8v;
		non-removable;
		pinctl = <&mmc0_pins_default>;
		register_setting = <&mmc0_register_setting_default>;
		host_function = /bits/ 8 <MSDC_EMMC>;
		bootable;
		status = "okay";
};

&mmc1 {
		clk_src = /bits/ 8 <MSDC30_CLKSRC_200MHZ>;
		bus-width = <4>;
		max-frequency = <200000000>;
		msdc-sys-suspend;
		sd_need_power;
		cap-sd-highspeed;
		sd-uhs-sdr12;
		sd-uhs-sdr25;
		sd-uhs-sdr50;
		sd-uhs-sdr104;
		sd-uhs-ddr50;
		pinctl = <&mmc1_pins_default>;
		pinctl_sdr104 = <&mmc1_pins_sdr104>;
		pinctl_sdr50 = <&mmc1_pins_sdr50>;
		pinctl_ddr50 = <&mmc1_pins_ddr50>;
		register_setting = <&mmc1_register_setting_default>;
		host_function = /bits/ 8 <MSDC_SD>;
		cd_level = /bits/ 8 <MSDC_CD_HIGH>;
		cd-gpios = <&pio 76 0>;
		status = "okay";
};

&mmc2 {
		clk_src = /bits/ 8 <MSDC30_CLKSRC_200MHZ>;
		bus-width = <4>;
		max-frequency = <200000000>;
		cap-sd-highspeed;
		sd-uhs-sdr12;
		sd-uhs-sdr25;
		sd-uhs-sdr50;
		sd-uhs-sdr104;
		sd-uhs-ddr50;
		non-removable;
		host_function = /bits/ 8 <MSDC_SDIO>;
		status = "okay";
};

&pio {
	mmc0_pins_default: mmc0@default {
			pins_cmd {
				drive-strength = /bits/ 8 <2>;
			};
			pins_dat {
				drive-strength = /bits/ 8 <2>;
			};
			pins_clk {
				drive-strength = /bits/ 8 <2>;
			};
			pins_rst {
				drive-strength = /bits/ 8 <2>;
			};
			pins_ds {
				drive-strength = /bits/ 8 <2>;
			};
	};

	mmc0_register_setting_default: mmc0@register_default {
		dat0rddly      = /bits/ 8 <0>;
		dat1rddly      = /bits/ 8 <0>;
		dat2rddly      = /bits/ 8 <0>;
		dat3rddly      = /bits/ 8 <0>;
		dat4rddly      = /bits/ 8 <0>;
		dat5rddly      = /bits/ 8 <0>;
		dat6rddly      = /bits/ 8 <0>;
		dat7rddly      = /bits/ 8 <0>;
		datwrddly      = /bits/ 8 <0>;
		cmdrrddly      = /bits/ 8 <0>;
		cmdrddly       = /bits/ 8 <0>;
		cmd_edge = /bits/ 8 <MSDC_SMPL_FALLING>;
		rdata_edge = /bits/ 8 <MSDC_SMPL_FALLING>;
		wdata_edge = /bits/ 8 <MSDC_SMPL_FALLING>;

		ett-hs200-cells = <12>;
		ett-hs200-default = <OFFSET_MSDC_PATCH_BIT0	MSDC_PB0_INT_DAT_LATCH_CK_SEL 0x0
			OFFSET_MSDC_PATCH_BIT0	MSDC_PB0_CKGEN_MSDC_DLY_SEL   0x0
			OFFSET_MSDC_PATCH_BIT1	MSDC_PB1_CMD_RSP_TA_CNTR      0x1
			OFFSET_MSDC_IOCON		MSDC_IOCON_RSPL               0x1
			OFFSET_MSDC_PAD_TUNE0	MSDC_PAD_TUNE0_CMDRDLY        0xf
			OFFSET_MSDC_PAD_TUNE0	MSDC_PAD_TUNE0_CMDRRDLY       0x0
			OFFSET_MSDC_PATCH_BIT1		MSDC_PB1_WRDAT_CRCS_TA_CNTR   0x1
			OFFSET_MSDC_PAD_TUNE0	MSDC_PAD_TUNE0_DATWRDLY       0xf
			OFFSET_MSDC_IOCON			MSDC_IOCON_W_D0SPL            0x1
			OFFSET_MSDC_DAT_RDDLY0		MSDC_DAT_RDDLY0_D0            0xf
			OFFSET_MSDC_PAD_TUNE0	MSDC_PAD_TUNE0_DATRRDLY       0x16
			OFFSET_MSDC_IOCON		MSDC_IOCON_R_D_SMPL           0x0>;

		ett-hs400-cells = <8>;
		ett-hs400-default = <OFFSET_MSDC_PATCH_BIT0	MSDC_PB0_INT_DAT_LATCH_CK_SEL	0x0
			OFFSET_MSDC_PATCH_BIT0		MSDC_PB0_CKGEN_MSDC_DLY_SEL		0x0
			OFFSET_EMMC50_PAD_DS_TUNE	MSDC_EMMC50_PAD_DS_TUNE_DLY1	0x2
			OFFSET_EMMC50_PAD_DS_TUNE	MSDC_EMMC50_PAD_DS_TUNE_DLY3	0xe
			OFFSET_MSDC_PATCH_BIT1			MSDC_PB1_CMD_RSP_TA_CNTR	0x1
			OFFSET_MSDC_IOCON		MSDC_IOCON_RSPL				0x0
			OFFSET_MSDC_PAD_TUNE0			MSDC_PAD_TUNE0_CMDRDLY		0xf
			OFFSET_MSDC_PAD_TUNE0		MSDC_PAD_TUNE0_CMDRRDLY		0xd>;
	};

	mmc1_pins_default: mmc1@default {
			pins_cmd {
				drive-strength = /bits/ 8 <3>;
			};
			pins_dat {
				drive-strength = /bits/ 8 <3>;
			};
			pins_clk {
				drive-strength = /bits/ 8 <3>;
			};
	};

	mmc1_pins_sdr104: mmc1@sdr104 {
			pins_cmd {
				drive-strength = /bits/ 8 <2>;
			};
			pins_dat {
				drive-strength = /bits/ 8 <2>;
			};
			pins_clk {
				drive-strength = /bits/ 8 <3>;
			};
	};

	mmc1_pins_sdr50: mmc1@sdr50 {
			pins_cmd {
				drive-strength = /bits/ 8 <2>;
			};
			pins_dat {
				drive-strength = /bits/ 8 <2>;
			};
			pins_clk {
				drive-strength = /bits/ 8 <3>;
			};
	};

	mmc1_pins_ddr50: mmc1@ddr50 {
			pins_cmd {
				drive-strength = /bits/ 8 <2>;
			};
			pins_dat {
				drive-strength = /bits/ 8 <2>;
			};
			pins_clk {
				drive-strength = /bits/ 8 <3>;
			};
	};

	mmc1_register_setting_default: mmc1@register_default {
				dat0rddly      = /bits/ 8 <0>;
				dat1rddly      = /bits/ 8 <0>;
				dat2rddly      = /bits/ 8 <0>;
				dat3rddly      = /bits/ 8 <0>;
				datwrddly      = /bits/ 8 <0>;
				cmdrrddly      = /bits/ 8 <0>;
				cmdrddly       = /bits/ 8 <0>;
				cmd_edge = /bits/ 8 <MSDC_SMPL_FALLING>;
				rdata_edge = /bits/ 8 <MSDC_SMPL_FALLING>;
				wdata_edge = /bits/ 8 <MSDC_SMPL_FALLING>;
	};
};
/* mmc end */

	/* ++++++ Connectivity GPIO configs ++++++ */
&pio {
	pinctrl-names = "default";
	pinctrl-0 = <&state_default>;
	pcfg_combo_pmu_en_pull_dis_cfgs:cfg_mode1_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO21__FUNC_GPIO21>;
			bias-disable;
		};
	};

	pcfg_combo_pmu_en_in_pulldown_cfgs:cfg_mode1_in_pulldown {
		combo_pins {
			pinmux = <PINMUX_GPIO21__FUNC_GPIO21>;
			bias-pull-down;
		};
	};

	pcfg_combo_rst_pull_dis_cfgs:cfg_mode1_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO186__FUNC_GPIO186>;
			bias-disable;
		};
	};

	pcfg_combo_wifi_eint_in_pull_dis_cfgs:cfg_mode1_in_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
			input-enable;
			bias-disable;
		};
	};
	pcfg_combo_wifi_eint_in_pullup_cfgs:cfg_mode1_in_pullup {
		combo_pins {
			pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
			input-enable;
			bias-pull-up;
		};
	};

	pcfg_combo_urxd_uart_pull_dis_cfgs:cfg_mode2_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO74__FUNC_URXD0>;
			bias-disable;
		};
	};
	pcfg_combo_urxd_gpio_in_pullup_cfgs:cfg_mode1_in_pullup {
		combo_pins {
			pinmux = <PINMUX_GPIO74__FUNC_URXD0>;
			input-enable;
			bias-pull-up;
		};
	};
	pcfg_combo_urxd_gpio_in_pull_dis_cfgs:cfg_mode1_in_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO74__FUNC_URXD0>;
			input-enable;
			bias-disable;
		};
	};

	pcfg_combo_utxd_uart_pull_dis_cfgs:cfg_mode2_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO75__FUNC_UTXD0>;
			bias-disable;
		};
	};

	pcfg_combo_pcm_daiclk_pull_dis_cfgs:cfg_mode3_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO184__FUNC_PCM0_CLK>;
			bias-disable;
		};
	};

	pcfg_combo_pcm_daipcmin_pull_dis_cfgs:cfg_mode3_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO185__FUNC_PCM0_DI>;
			bias-disable;
		};
	};

	pcfg_combo_pcm_daipcmout_pull_dis_cfgs:cfg_mode3_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO187__FUNC_PCM0_DO>;
			bias-disable;
		};
	};

	pcfg_combo_pcm_daisync_pull_dis_cfgs:cfg_mode3_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO188__FUNC_PCM0_SYNC>;
			bias-disable;
		};
	};

	pcfg_combo_gps_sync_pull_dis_cfgs:cfg_mode1_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO19__FUNC_GPS_FRAME_SYNC>;
			bias-disable;
		};
	};
	pcfg_combo_gps_lna_pull_dis_cfgs:cfg_mode1_pull_dis {
		combo_pins {
			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>;
			bias-disable;
		};
	};

	state_default:pinctrl {
		/* ++++++ Connectivity GPIO configs ++++++ */
		combo_wifi_eint_pins {
			pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
			bias-pull-up;
		};

		combo_pcm_pins {
			pinmux = <PINMUX_GPIO184__FUNC_MRG_CLK>,
				   <PINMUX_GPIO185__FUNC_MRG_DI>,
				   <PINMUX_GPIO187__FUNC_MRG_DO>,
				   <PINMUX_GPIO188__FUNC_MRG_SYNC>;
			bias-disable;
		};
		/* ----- Connectivity GPIO configs ----- */
	};
	/* ------ Connectivity GPIO configs ------ */
};

/* NFC GPIO standardization */
&pio {
	nfc_default: default {

	};

	nfc_ven_high: state_ven_high {
		pins_cmd_dat {
			pins = <PINMUX_GPIO4__FUNC_GPIO4>;
			slew-rate = <1>;
			output-high;
		};
	};

	nfc_ven_low: state_ven_low {
		pins_cmd_dat {
			pins = <PINMUX_GPIO4__FUNC_GPIO4>;
			slew-rate = <1>;
			output-low;
		};
	};

	nfc_rst_high: state_rst_high {
		pins_cmd_dat {
			pins = <PINMUX_GPIO3__FUNC_GPIO3>;
			slew-rate = <1>;
			output-high;
		};
	};

	nfc_rst_low: state_rst_low {
		pins_cmd_dat {
			pins = <PINMUX_GPIO3__FUNC_GPIO3>;
			slew-rate = <1>;
			output-low;
		};
	};

	nfc_eint_high: state_eint_high {
		pins_cmd_dat {
			pins = <PINMUX_GPIO1__FUNC_GPIO1>;
			slew-rate = <1>;
			output-high;
		};
	};

	nfc_eint_low: state_eint_low {
		pins_cmd_dat {
			pins = <PINMUX_GPIO1__FUNC_GPIO1>;
			slew-rate = <1>;
			output-low;
		};
	};

	nfc_irq_init: state_irq_init {
		pins_cmd_dat {
			pins = <PINMUX_GPIO2__FUNC_GPIO2>;
			slew-rate = <0>;
			bias-pull-down = <00>;
		};
	};
};

&nfc {
	pinctrl-names = "default", "ven_high", "ven_low", "rst_high", "rst_low", "eint_high", "eint_low", "irq_init";
	pinctrl-0 = <&nfc_default>;
	pinctrl-1 = <&nfc_ven_high>;
	pinctrl-2 = <&nfc_ven_low>;
	pinctrl-3 = <&nfc_rst_high>;
	pinctrl-4 = <&nfc_rst_low>;
	pinctrl-5 = <&nfc_eint_high>;
	pinctrl-6 = <&nfc_eint_low>;
	pinctrl-7 = <&nfc_irq_init>;
	status = "okay";
};
/* NFC end */

/* USB GPIO Kernal Standardization start */
&pio {
	usb_default: usb_default {
	};

	gpio67_mode5_iddig: iddig_irq_init {
		pins_cmd_dat {
			pins = <PINMUX_GPIO67__FUNC_IDDIG>;
			slew-rate = <0>;
			bias-pull-up = <00>;
		};
	};

	gpio83_mode0_drvvbus: drvvbus_init {
		pins_cmd_dat {
			pins = <PINMUX_GPIO83__FUNC_GPIO83>;
			slew-rate = <1>;
			bias-pull-up = <00>;
		};
	};

	gpio83_mode0_drvvbus_low: drvvbus_low {
		pins_cmd_dat {
			pins = <PINMUX_GPIO83__FUNC_GPIO83>;
			slew-rate = <1>;
			output-low;
		};
	};

	gpio83_mode0_drvvbus_high: drvvbus_high {
		pins_cmd_dat {
			pins = <PINMUX_GPIO83__FUNC_GPIO83>;
			slew-rate = <1>;
			output-high;
		};
	};
};

&usb0 {
	iddig_gpio = <67 5>;
	pinctrl-names = "usb_default", "iddig_irq_init", "drvvbus_init", "drvvbus_low", "drvvbus_high";
	pinctrl-0 = <&usb_default>;
	pinctrl-1 = <&gpio67_mode5_iddig>;
	pinctrl-2 = <&gpio83_mode0_drvvbus>;
	pinctrl-3 = <&gpio83_mode0_drvvbus_low>;
	pinctrl-4 = <&gpio83_mode0_drvvbus_high>;
	status = "okay";
};
/* USB GPIO Kernal Standardization end */

/* LCM GPIO Kernal Standardization start */
&pio {
	lcm_mode_default: lcm_mode_default {
		pins_cmd_dat {
			pins = <PINMUX_GPIO80__FUNC_GPIO80>;
		};
	};

	lcm_mode_00: lcm_mode@0 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO80__FUNC_GPIO80>;
		};
	};

	lcm_mode_01: lcm_mode@1 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO80__FUNC_I2S0_BCK>;
		};
	};

	lcm_mode_02: lcm_mode@2 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO80__FUNC_PCM1_CLK_1>;
		};
	};

	lcm_mode_03: lcm_mode@3 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO80__FUNC_I2S3_BCK>;
		};
	};

	lcm_mode_04: lcm_mode@4 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO80__FUNC_I2S1_BCK>;
		};
	};

	lcm_mode_05: lcm_mode@5 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO80__FUNC_PWM4>;
		};
	};

	lcm_mode_06: lcm_mode@6 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO80__FUNC_I2S2_BCK>;
		};
	};

	lcm_mode_07: lcm_mode@7 {
		pins_cmd_dat {
			pins = <PINMUX_GPIO80__FUNC_DBG_MON_A28>;
		};
	};
};

&lcm {
	gpio_lcm_pwr_en = <&pio 64 0>;
	gpio_lcm_rst_en = <&pio 146 0>;
};

&lcm_mode {
	pinctrl-names = "default", "lcm_mode_00", "lcm_mode_01", "lcm_mode_02", "lcm_mode_03", "lcm_mode_04",
	 "lcm_mode_05", "lcm_mode_06", "lcm_mode_07";
	pinctrl-0 = <&lcm_mode_default>;
	pinctrl-1 = <&lcm_mode_00>;
	pinctrl-2 = <&lcm_mode_01>;
	pinctrl-3 = <&lcm_mode_02>;
	pinctrl-4 = <&lcm_mode_03>;
	pinctrl-5 = <&lcm_mode_04>;
	pinctrl-6 = <&lcm_mode_05>;
	pinctrl-7 = <&lcm_mode_06>;
	pinctrl-8 = <&lcm_mode_07>;
	lcm_power_gpio = <&pio 80 0>;
	lcm_bl_gpio = <&pio 129 0>;
	status = "okay";
};
/* LCM GPIO Kernal Standardization end */

/* i2c start */
&i2c3 {
	ncp1854@36 {
		status = "okay";
		compatible = "ncp1854";
		reg = <0x36>;
		disable_ncp1854_fctry_mod = <1>;
		pinctrl-names = "drvvbus_init", "drvvbus_low";
		pinctrl-0 = <&gpio83_mode0_drvvbus>;
		pinctrl-1 = <&gpio83_mode0_drvvbus_low>;
	};
};
/* i2c end */