sun5i-a13-hsg-h702.dts 3.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130
  1. /*
  2. * Copyright 2014 Chen-Yu Tsai <wens@csie.org>
  3. *
  4. * This file is dual-licensed: you can use it either under the terms
  5. * of the GPL or the X11 license, at your option. Note that this dual
  6. * licensing only applies to this file, and not this project as a
  7. * whole.
  8. *
  9. * a) This library is free software; you can redistribute it and/or
  10. * modify it under the terms of the GNU General Public License as
  11. * published by the Free Software Foundation; either version 2 of the
  12. * License, or (at your option) any later version.
  13. *
  14. * This library is distributed in the hope that it will be useful,
  15. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  17. * GNU General Public License for more details.
  18. *
  19. * You should have received a copy of the GNU General Public
  20. * License along with this library; if not, write to the Free
  21. * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22. * MA 02110-1301 USA
  23. *
  24. * Or, alternatively,
  25. *
  26. * b) Permission is hereby granted, free of charge, to any person
  27. * obtaining a copy of this software and associated documentation
  28. * files (the "Software"), to deal in the Software without
  29. * restriction, including without limitation the rights to use,
  30. * copy, modify, merge, publish, distribute, sublicense, and/or
  31. * sell copies of the Software, and to permit persons to whom the
  32. * Software is furnished to do so, subject to the following
  33. * conditions:
  34. *
  35. * The above copyright notice and this permission notice shall be
  36. * included in all copies or substantial portions of the Software.
  37. *
  38. * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39. * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40. * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41. * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42. * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43. * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44. * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45. * OTHER DEALINGS IN THE SOFTWARE.
  46. */
  47. /dts-v1/;
  48. /include/ "sun5i-a13.dtsi"
  49. /include/ "sunxi-common-regulators.dtsi"
  50. / {
  51. model = "HSG H702";
  52. compatible = "hsg,h702", "allwinner,sun5i-a13";
  53. soc@01c00000 {
  54. mmc0: mmc@01c0f000 {
  55. pinctrl-names = "default";
  56. pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
  57. vmmc-supply = <&reg_vcc3v3>;
  58. bus-width = <4>;
  59. cd-gpios = <&pio 6 0 0>; /* PG0 */
  60. cd-inverted;
  61. status = "okay";
  62. };
  63. usbphy: phy@01c13400 {
  64. /*
  65. * There doesn't seem to be a GPIO for controlling
  66. * usb1 vbus, despite the fex file saying otherwise.
  67. */
  68. usb1_vbus-supply = <&reg_vcc5v0>;
  69. status = "okay";
  70. };
  71. ehci0: usb@01c14000 {
  72. status = "okay";
  73. };
  74. ohci0: usb@01c14400 {
  75. status = "okay";
  76. };
  77. pinctrl@01c20800 {
  78. mmc0_cd_pin_h702: mmc0_cd_pin@0 {
  79. allwinner,pins = "PG0";
  80. allwinner,function = "gpio_in";
  81. allwinner,drive = <0>;
  82. allwinner,pull = <1>;
  83. };
  84. };
  85. uart1: serial@01c28400 {
  86. pinctrl-names = "default";
  87. pinctrl-0 = <&uart1_pins_b>;
  88. status = "okay";
  89. };
  90. i2c0: i2c@01c2ac00 {
  91. pinctrl-names = "default";
  92. pinctrl-0 = <&i2c0_pins_a>;
  93. status = "okay";
  94. axp209: pmic@34 {
  95. compatible = "x-powers,axp209";
  96. reg = <0x34>;
  97. interrupts = <0>;
  98. interrupt-controller;
  99. #interrupt-cells = <1>;
  100. };
  101. };
  102. i2c1: i2c@01c2b000 {
  103. pinctrl-names = "default";
  104. pinctrl-0 = <&i2c1_pins_a>;
  105. status = "okay";
  106. pcf8563: rtc@51 {
  107. compatible = "nxp,pcf8563";
  108. reg = <0x51>;
  109. };
  110. };
  111. i2c2: i2c@01c2b400 {
  112. pinctrl-names = "default";
  113. pinctrl-0 = <&i2c2_pins_a>;
  114. status = "okay";
  115. };
  116. };
  117. };