| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115 |
- menuconfig SND_FIREWIRE
- bool "FireWire sound devices"
- depends on FIREWIRE
- default y
- help
- Support for IEEE-1394/FireWire/iLink sound devices.
- if SND_FIREWIRE && FIREWIRE
- config SND_FIREWIRE_LIB
- tristate
- select SND_PCM
- select SND_RAWMIDI
- config SND_DICE
- tristate "DICE-based DACs (EXPERIMENTAL)"
- select SND_HWDEP
- select SND_FIREWIRE_LIB
- help
- Say Y here to include support for many DACs based on the DICE
- chip family (DICE-II/Jr/Mini) from TC Applied Technologies.
- At the moment, this driver supports playback only. If you
- want to use devices that support capturing, use FFADO instead.
- To compile this driver as a module, choose M here: the module
- will be called snd-dice.
- config SND_FIREWIRE_SPEAKERS
- tristate "FireWire speakers"
- select SND_FIREWIRE_LIB
- help
- Say Y here to include support for the Griffin FireWave Surround
- and the LaCie FireWire Speakers.
- To compile this driver as a module, choose M here: the module
- will be called snd-firewire-speakers.
- config SND_ISIGHT
- tristate "Apple iSight microphone"
- select SND_FIREWIRE_LIB
- help
- Say Y here to include support for the front and rear microphones
- of the Apple iSight web camera.
- To compile this driver as a module, choose M here: the module
- will be called snd-isight.
- config SND_SCS1X
- tristate "Stanton Control System 1 MIDI"
- select SND_FIREWIRE_LIB
- help
- Say Y here to include support for the MIDI ports of the Stanton
- SCS.1d/SCS.1m DJ controllers. (SCS.1m audio is still handled
- by FFADO.)
- To compile this driver as a module, choose M here: the module
- will be called snd-scs1x.
- config SND_FIREWORKS
- tristate "Echo Fireworks board module support"
- select SND_FIREWIRE_LIB
- select SND_HWDEP
- help
- Say Y here to include support for FireWire devices based
- on Echo Digital Audio Fireworks board:
- * Mackie Onyx 400F/1200F
- * Echo AudioFire12/8(until 2009 July)
- * Echo AudioFire2/4/Pre8/8(since 2009 July)
- * Echo Fireworks 8/HDMI
- * Gibson Robot Interface Pack/GoldTop
- To compile this driver as a module, choose M here: the module
- will be called snd-fireworks.
- config SND_BEBOB
- tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
- select SND_FIREWIRE_LIB
- select SND_HWDEP
- help
- Say Y here to include support for FireWire devices based
- on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
- * Edirol FA-66/FA-101
- * PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
- * BridgeCo RDAudio1/Audio5
- * Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
- * Mackie d.2 (FireWire Option)
- * Stanton FinalScratch 2 (ScratchAmp)
- * Tascam IF-FW/DM
- * Behringer XENIX UFX 1204/1604
- * Behringer Digital Mixer X32 series (X-UF Card)
- * Apogee Rosetta 200/400 (X-FireWire card)
- * Apogee DA/AD/DD-16X (X-FireWire card)
- * Apogee Ensemble
- * ESI QuataFire 610
- * AcousticReality eARMasterOne
- * CME MatrixKFW
- * Phonic Helix Board 12 MkII/18 MkII/24 MkII
- * Phonic Helix Board 12 Universal/18 Universal/24 Universal
- * Lynx Aurora 8/16 (LT-FW)
- * ICON FireXon
- * PrismSound Orpheus/ADA-8XR
- * TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
- * TerraTec EWS MIC2/EWS MIC8
- * TerraTec Aureon 7.1 FireWire
- * Yamaha GO44/GO46
- * Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
- * M-Audio FireWire410/AudioPhile/Solo
- * M-Audio Ozonic/NRV10/ProfireLightBridge
- * M-Audio FireWire 1814/ProjectMix IO
- To compile this driver as a module, choose M here: the module
- will be called snd-bebob.
- endif # SND_FIREWIRE
|
