| 123456789101112131415161718192021222324252627282930 |
- Tegra124 SoC SATA AHCI controller
- Required properties :
- - compatible : "nvidia,tegra124-ahci".
- - reg : Should contain 2 entries:
- - AHCI register set (SATA BAR5)
- - SATA register set
- - interrupts : Defines the interrupt used by SATA
- - clocks : Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
- - clock-names : Must include the following entries:
- - sata
- - sata-oob
- - cml1
- - pll_e
- - resets : Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
- - reset-names : Must include the following entries:
- - sata
- - sata-oob
- - sata-cold
- - phys : Must contain an entry for each entry in phy-names.
- See ../phy/phy-bindings.txt for details.
- - phy-names : Must include the following entries:
- - sata-phy : XUSB PADCTL SATA PHY
- - hvdd-supply : Defines the SATA HVDD regulator
- - vddio-supply : Defines the SATA VDDIO regulator
- - avdd-supply : Defines the SATA AVDD regulator
- - target-5v-supply : Defines the SATA 5V power regulator
- - target-12v-supply : Defines the SATA 12V power regulator
|
