Aquaris-M10-4G/include/linux/irqchip/mt-eic.h

#ifndef __EINT_H
#define __EINT_H

/*
 * Hardware registers and settings.
 */
#define EINT_STA_BASE         (((unsigned long)EINT_BASE + 0x000))
#define EINT_INTACK_BASE      (((unsigned long)EINT_BASE + 0x040))
#define EINT_MASK_BASE        (((unsigned long)EINT_BASE + 0x080))
#define EINT_MASK_SET_BASE    (((unsigned long)EINT_BASE + 0x0c0))
#define EINT_MASK_CLR_BASE    (((unsigned long)EINT_BASE + 0x100))
#define EINT_SENS_BASE        (((unsigned long)EINT_BASE + 0x140))
#define EINT_SENS_SET_BASE    (((unsigned long)EINT_BASE + 0x180))
#define EINT_SENS_CLR_BASE    (((unsigned long)EINT_BASE + 0x1c0))
#define EINT_SOFT_BASE        (((unsigned long)EINT_BASE + 0x200))
#define EINT_SOFT_SET_BASE    (((unsigned long)EINT_BASE + 0x240))
#define EINT_SOFT_CLR_BASE    (((unsigned long)EINT_BASE + 0x280))
#define EINT_POL_BASE         (((unsigned long)EINT_BASE + 0x300))
#define EINT_POL_SET_BASE     (((unsigned long)EINT_BASE + 0x340))
#define EINT_POL_CLR_BASE     (((unsigned long)EINT_BASE + 0x380))
#define EINT_D0_EN_BASE       (((unsigned long)EINT_BASE + 0x400))
#define EINT_D1_EN_BASE       (((unsigned long)EINT_BASE + 0x420))
#define EINT_D2_EN_BASE       (((unsigned long)EINT_BASE + 0x440))
#define EINT_DBNC_BASE        (((unsigned long)EINT_BASE + 0x500))
#define EINT_DBNC_SET_BASE    (((unsigned long)EINT_BASE + 0x600))
#define EINT_DBNC_CLR_BASE    (((unsigned long)EINT_BASE + 0x700))
#define DEINT_CON_BASE        (((unsigned long)EINT_BASE + 0x800))
#define DEINT_SEL_BASE        (((unsigned long)EINT_BASE + 0x840))
#define DEINT_SEL_SET_BASE    (((unsigned long)EINT_BASE + 0x880))
#define DEINT_SEL_CLR_BASE    (((unsigned long)EINT_BASE + 0x8c0))
#define EINT_EEVT_BASE	      (((unsigned long)EINT_BASE + 0x900))
#define EINT_RAW_STA_BASE     (((unsigned long)EINT_BASE + 0xA00))
#define EINT_EMUL_BASE        (((unsigned long)EINT_BASE + 0xF00))
#define EINT_DBNC_SET_DBNC_BITS    (4)
#define EINT_DBNC_CLR_DBNC_BITS    (4)
#define EINT_DBNC_SET_EN_BITS      (0)
#define EINT_DBNC_CLR_EN_BITS      (0)
#define EINT_DBNC_SET_RST_BITS     (1)
#define EINT_DBNC_EN_BIT           (0x1)
#define EINT_DBNC_RST_BIT          (0x1)
#define EINT_DBNC_0_MS             (0x7)
#define EINT_DBNC                  (0x7)
#define EINT_DBNC_SET_EN           (0x1)
#define EINT_DBNC_CLR_EN           (0x1)
#define EINT_STA_DEFAULT	0x00000000
#define EINT_INTACK_DEFAULT	0x00000000
#define EINT_EEVT_DEFAULT	0x00000001
#define EINT_MASK_DEFAULT	0x00000000
#define EINT_MASK_SET_DEFAULT	0x00000000
#define EINT_MASK_CLR_DEFAULT	0x00000000
#define EINT_SENS_DEFAULT	0x0000FFFF
#define EINT_SENS_SET_DEFAULT	0x00000000
#define EINT_SENS_CLR_DEFAULT	0x00000000
#define EINT_D0EN_DEFAULT	0x00000000
#define EINT_D1EN_DEFAULT	0x00000000
#define EINT_D2EN_DEFAULT	0x00000000
#define EINT_DBNC_DEFAULT(n)	0x00000000
#define DEINT_MASK_DEFAULT      0x00000000
#define DEINT_MASK_SET_DEFAULT  0x00000000
#define DEINT_MASK_CLR_DEFAULT  0x00000000

/*
 * Define constants.
 */
#define MT_EINT_POL_NEG         0
#define MT_EINT_POL_POS         1
#define MAX_HW_DEBOUNCE_CNT     32
#define EINTF_TRIGGER_RISING    0x00000001
#define EINTF_TRIGGER_FALLING   0x00000002
#define EINTF_TRIGGER_HIGH      0x00000004
#define EINTF_TRIGGER_LOW       0x00000008
#define EINT_IRQ(eint)          (eint+EINT_IRQ_BASE)
#define DEMUX_EINT_IRQ(irq)     (irq-EINT_IRQ_BASE)
#define EINT_GPIO(eint)         eint
#define GPIOPIN                 0
#define DEBOUNCE                1
#define EINT_DELAY_WARNING      3000000
#define MT_EDGE_SENSITIVE 0
#define MT_LEVEL_SENSITIVE 1
#define MT_POLARITY_LOW   0
#define MT_POLARITY_HIGH  1

/*
 * Define function prototypes.
 */
extern void _print_status(void);
extern int mt_gpio_set_debounce(unsigned gpio, unsigned debounce);
extern unsigned int mt_gpio_to_irq(unsigned gpio);
extern int mt_get_supported_irq_num_ex(void) __attribute__((weak));

void mt_eint_mask(unsigned int eint_num);
void mt_eint_unmask(unsigned int eint_num);
void mt_eint_set_hw_debounce(unsigned int eint_num, unsigned int ms);
void mt_eint_set_polarity(unsigned int eint_num, unsigned int pol);
unsigned int mt_eint_set_sens(unsigned int eint_num, unsigned int sens);
void mt_eint_virq_soft_clr(unsigned int virq);

/* used to access the gic device tree resource */
extern int mt_get_supported_irq_num(void);

/*
 * Define structure prototypes
 */

struct EINT_HEADER {
	unsigned int is_autounmask;
};

struct pin_node {
	struct rb_node node;
	u32 gpio_pin;
	u32 eint_pin;
};

#endif